Ricoh SDC326 Operating Instructions Manual page 77

Copying
Note
❒ If you have assigned the Directional Size Magnification (inch) function to
one of the {Favorite} keys, press it and go to step D. To assign a function to
the {Favorite} keys, ⇒ P.147 "Set favorite keys".
B
Press the [↓ ↓ ↓ ↓ Next] key until [D. Size Mag. (inch)] is displayed.
Copy004.tif
2
Trss112e.eps
C
Select [D. Size Mag. (inch)] with the <
Copy309.tif
Trss114e.eps
D
Enter the vertical original size with the number keys, then press the >
[#] key.
Copy310.tif
Note
❒ To change the value entered:
• If you have not pressed the > or [#] key yet, press the {Clear} key and
enter a new value.
• If you have already pressed the > or [#] key, select [Orig.:Vert.] with the
<> key and enter the new value.
E
Enter the vertical copy paper size with the number keys, then press the >
or [#] key.
Copy311.tif
Note
❒ If you press the [OK] key after entering the vertical original and paper sizes,
the horizontal ratio will become same as the vertical ratio automatically.
66
< > < < > keys, then press the [Select] key. > >
> or
> >
> > >