Setting Custom Sized Originals - Ricoh SDC326 Operating Instructions Manual

Basics

Setting Custom Sized Originals

When copying from custom sized originals, enter the original size so that copy
is well aligned.
1
Limitation
❒ You must set your custom sized originals on the exposure glass.
Reference
For the standard sizes the machine can detect, ⇒ P.16 "Standard Size Origi-
nals".
Note
❒ The dimensions you can enter must be within the following ranges:
Vertical size
Horizontal size
A
Select the copy paper size.
B
Press the { { { { Menu} } } } key.
Trss222n.eps
C
Make sure that the [Custom Size Orig.] is selected, then press the [Select] key.
Copy004.tif
Trss114e.eps
24
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)