Operation Panel - Ricoh SDC326 Operating Instructions Manual

Operation Panel

{ { { { User Tools} } } } key
1.
Press to change the default settings and
conditions to meet your requirements.
{ { { { Color Balance} } } } key
2.
Press to adjust and store the color bal-
ance. ⇒ P.97 "Color Balance".
{ { { { Menu} } } } key
3.
Displays the names of available func-
tions.
{ { { { Favorite} } } } keys
4.
Press to use the stored functions you fre-
quently use. By default, the following
functions are stored:
• Combine 2 Originals
• Series Copies
• Margin Adjustment
• Directional Size Magnification (inch)
{ { { { Directional Mag.(%)} } } } key
5.
Press to use Directional Magnification
(%) mode. ⇒ P.63 "Directional Magnifica-
tion (%)".
{ { { { Sorter} } } } key
6.
Press to select Sort, Stack or Staple mode.
⇒ P.89 "Sort".
7.
Panel Display
Shows operation status, error messages,
and function menus. ⇒ P.9 "Panel Dis-
play".
{ { { { Selection} } } } keys
8.
Press the key under the item you wish to
select.
9.
Indicators
These indicators show errors or the status
of the machine. ⇒ P.111 "What to Do If
Something Goes Wrong".
{ { { { Check Modes} } } } key
10.
Press to check all the settings you have
set.
{ { { { Program} } } } key
11.
Press to select the program mode. ⇒ P.54
"Program".
{ { { { Clear Modes} } } } key
12.
Press to clear the previously entered set-
tings.
{ { { { Energy Saver} } } } key
13.
Press to enter/exit Energy Saver mode.
⇒ P.52 "Energy Saver Mode".
{ { { { Interrupt} } } } key
14.
Press to make interrupt copies. ⇒ P.53
"Interrupt Copying".
{ { { { Counter} } } } key
15.
Press to check the total number of copies
made. ⇒ P.58 "Counter".
7