Ricoh SDC326 Operating Instructions Manual page 19

16.
Main Power indicator
This indicator goes on when the main
power switch is turned on, and goes off
when the switch is turned off.
17.
On indicator
This indicator goes on when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
18.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
{ { { { Clear/Stop} } } } key
19.
Press to cancel the copy number entered.
While copying, press to stop copying.
This key is also used to clear data.
{ { { { Start} } } } key
20.
Press to start copying. Use to set the Auto
Start.
{ { { { #} } } } key
21.
Use to enter data in selected modes.
22.
Number keys
Use to enter the desired number of cop-
ies. They are also used to enter data.
1 1 1 1 2 2 2 2 keys (Color Mode keys)
23.
Press to select the color mode. ⇒ P.30
"Selecting a Color Mode".
{ { { { Original} } } } key
24.
Press to specify the type of original im-
age. ⇒ P.35 "Selecting the Original Image
Type (Photo/Text)".
< < > > keys (Cursor keys)
< < > >
25.
Press to select an item on the panel dis-
play.
{ { { { Auto Image Density} } } } key
26.
Press to make copies in Auto Image Den-
sity mode. ⇒ P.28 "Auto image density".
{ { { { Darker} } } } key
27.
Press to increase the image density.
{ { { { Lighter} } } } key
28.
Press to lower the image density.
8
{ { { { Auto Reduce/Enlarge} } } } key
29.
Enlarges or reduces the image automati-
cally according to the specified paper
size. ⇒ P.51 "Auto Reduce/Enlarge".
{ { { { Zoom} } } } key
30.
Enlarges or reduces in 1 % steps. ⇒ P.61
"Zoom".
{ { { { Image Adjustment} } } } key
31.
Press to change the default settings for
image adjustment. ⇒ P.100 "Image Ad-
justment".
{ { { { Bypass Feed} } } } key
32.
Press to select the paper type when copy-
ing with the bypass tray. ⇒ P.42 "Copying
from the Bypass Tray".