Setting Originals; Setting Originals On The Exposure Glass - Ricoh Aficio 650 Operating Instructions Manual

Setting Originals

Limitation
Set the original after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
Note
Basically the originals should be aligned to the rear left corner. However,
some copy functions may produce different results depending on the direc-
tion of the originals. For details, see explanations of each function.
Originals Set in the
document
feeder
R
R
R
R
Reference
See ⇒ P.18 "Originals".

Setting Originals On The Exposure Glass

A
Lift the document feeder.
Note
Be sure to open the document feeder by more than 30°, otherwise the orig-
inal size might not be detected correctly.
B
Set the original face down on the exposure glass. The original should be
aligned to the rear left corner.
Set on the
exposure
glass
set1EE
set2EE
Setting Originals
2
29