ANZ POS Turbo Plus Operating Manual page 91

LIMITED INTERFACE?
0-OFF
LIMITED INTERFACE?
1-ON
NOTE: If the screen displays with message "TMS REQUIRED" or "INIT REQUIRED", please refer to section
9.4 TMS Logon and Terminal initialisation for further information. Please note that once the Limited
interface is turned on, connection between your Point of Sale system and terminal will be default to
Serial cable and the terminal communication mode will use what is currently set on the terminal. If you
are using USB cable, please refer to section 9.4 How to install ANZ POS Turbo Plus terminal to change
connection from Serial cable to USB cable.
For further information on how to change to different communication modes on your terminal, please
follow the instructions on section 9.8 to make the changes.
Press 1 to turn on the limited interface and
press ENTER.
Then it returns to the main screen.