Table of Contents
Advertisement
39.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type "exit" to return to the SMT main menu
when finished.
System Maintenance
This chapter leads you through SMT menus 24.8 to 24.10.
Menu 24 - System Maintenance
1.
System Status
2.
System Information
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Firmware Update
8.
Command Interpreter Mode
9.
Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:
Figure 39-1 Command Mode in Menu 24
Prestige 652 Series User's Guide
System Maintenance
Chapter 39
39-1
Advertisement
Table of Contents
