Safety
Important information regarding the proper setup and maintenance of your touchcomputer:
To reduce the risk of electric shock, follow all safety notices and never open the
touchcomputer case.
Turn off the product before cleaning (refer to "Care and Handling" for proper
cleaning methods).
Your touchcomputer is equipped with a 3‐wire, grounding power cord. The power
cord plug only fits into a grounded outlet. Do not attempt to fit the plug into an
outlet that has not been configured for this purpose. Do not use a damaged power
cord. Only use the power cord that comes with your Elo Touch Solutions
touchcomputer. Use of an unauthorized power cord might invalidate your warranty.
The slots located on the sides and top of the touchcomputer case are for ventilation.
Do not block or insert anything inside the ventilation slots.
It is important that your touchcomputer remains dry. Do not pour liquid into or onto
your touchcomputer. If your touchcomputer becomes wet, do not attempt to repair
it yourself. Contact Elo Customer Service for instructions.
SAFETY AND MAINTENANCE
User Guide – B-Series Rev-B AiO Touchcomputer
SW602032 Rev C, Page 36 of 47
C H A P T E R
4