Setting Up the Operating System
If configured with an operating system, the initial setup of the operating system
takes approximately 5‐10 minutes. Additional time may be needed depending
on touchcomputer hardware configurations and connected devices.
To set up the Microsoft® Windows® Operating System for the touchcomputer,
turn on the touchcomputer by pressing the power button, and then follow the
on‐screen instructions.
Selecting the Language (For Windows XP Only)
Microsoft Windows® uses English as the default language in menus and dialog
boxes. You can change this language to suit your preferences when you reach
the screen below.
Note: If you choose to change the language after initial setup, you can follow
steps 1‐2 to arrive at the same screen below:
1. From the desktop, click Start > Control Panel
2. In the Control Panel screen, select Regional and Language Options.
3. Click Customize. The Regional and Language Options window appears.
Select the Languages tab.
User Guide – B-Series Rev-B AiO Touchcomputer
SW602032 Rev C, Page 12 of 47