2. Slide a card through the MSR and verify that the data is displayed in the
application window.
3. If the card ID appears in the Reader Output window, the reader is
functioning.
Customer Display (2x20 VFD)
You can optionally add a customer display to the B‐Series touchcomputer to any
of the three mounting locations located on the display head top, left, and right
of the touchcomputer. Software application and drivers can be found in the
following directory or on www.elotouch.com
C:\EloTouchSolutions\Peripherals
User Guide – B-Series Rev-B AiO Touchcomputer
SW602032 Rev C, Page 30 of 47