Safety
T
15D1 U
OUCHCOMPUTER
Here is some important information on the proper setup and maintenance of your
touchcomputer.
To reduce the risk of electric shock, follow all safety notices and never open the
◆
touchcomputer case.
Turn off the product before cleaning (refer to "Care and Handling" on page 28 for
◆
proper cleaning methods).
Your touchcomputer is equipped with a 3-wire, grounding power cord. The power
◆
cord plug only fits into a grounded outlet. Do not attempt to fit the plug into an outlet
that has not been configured for this purpose. Do not use a damaged power cord.
Only use the power cord that comes with your Elo TouchSystems touchcomputer.
Use of an unauthorized power cord might invalidate your warranty.
The slots located on the sides and top of the touchcomputer case are for ventilation.
◆
Do not block or insert anything inside the ventilation slots.
It is important that your touchcomputer remains dry. Do not pour liquid into or onto
◆
your touchcomputer. If your touchcomputer becomes wet, do not attempt to repair it
yourself.
G
SER
UIDE
Safety and Maintenance
C H A P T E R
4
27