Table of Contents
Advertisement
OR
II) Use the Elo recovery DVD(s)
ALL Windows XP and Windows 7 touchcomputers come with the built‐in
recovery DVD ISO files (images) on the system desktop in the [Recovery DVD
ISO Files] folder; please burn your recovery DVD(s) immediately. In the event
the HDD recovery partition is accidentally deleted or becomes inaccessible, you
will need to use the recovery DVD(s) to recover your system. If you do not wish
to create your own recovery DVD(s), you may purchase them by contacting Elo
Touch Solutions customer service. There will be a charge to provide recovery
DVD(s). Please use the matrix below to order your recovery DVD(s) and contact
information can be found on the last page of this guide.
Elo Part Number
E946871
E519596
E292535
E424767
E783316
E717493
E971232
Hardware needed:
1. Elo Touchcomputer
2. External USB DVD Drive
3. Elo Windows XP or Windows 7 Recovery DVD(s)
Procedure
1. Ensure the system is powered off.
2. Connect the USB DVD drive to the touchcomputer.
3. Place the recovery DVD in the DVD drive.
4. Power on the system.
5. Immediately press F11 several times to enter Device Boot Menu, and
choose boot from DVD.
6. Once launching the recovery process from the recovery DVDs, you will be
prompted with the following screen requiring you to choose which
recovery environment you would like to recover your system to: 64‐bit for
Windows 7 64‐bit recovery DVDs or 32‐bit for Windows XP/Windows 7
32‐bit recovery DVD(s).
DVD Label/Description
B2/C2 Windows XP Recovery Disk (AccuTouch Only)
B2/C2 Windows XP Recovery Disk (iTouch Plus Only)
B2/C2 Windows 7 32-bit Recovery Disks (All Models)
B3/C3 Windows XP Recovery Disk (AccuTouch Only)
B3/C3 Windows XP Recovery Disk (iTouch Plus Only)
B3/C3 Windows 7 32-bit Recovery Disks (All Models)
B3/C3 Windows 7 64-bit Recovery Disks (All Models)
User Guide – B-Series Rev-B AiO Touchcomputer
SW602032 Rev C, Page 24 of 47
Advertisement
Table of Contents
