Speaker Call In A Group - Siemens OpenStage 20 E User Manual

Step by Step
j
Enter code!
j
Enter code!

Speaker call in a group

You can also establish a normal connection within a
group or team (with team call = speed dial numbers 0-
9 or 00-99 for team members) via a speaker call. The
speaker call is then initiated by a group telephone.
The "COM group speaker call" function is line-in-
dependent - all phones can call each other via a
speaker call.
Speaker call to a variable destination
^
Lift the handset.
or
n
Press the key and enter speakerphone mode
(OpenStage 20/20 G only).
Enter the system code for "COM group speaker call"
(contact the relevant service personnel if necessary).
j
Enter the speed dial number for the corresponding
group member.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Do not disturb" is not activated
^
The called party accepts the DSS call by lifting the hand-
set.
n
When the called party presses the speaker key, the con-
nection is lost.
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loud-
speaker and the microphone of the destination phone
are automatically switched on.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode
(OpenStage 20/20 G only).
Enter the system code for "Speaker call-two-way" (con-
tact the relevant service personnel if necessary).
j
Enter the speed dial number for the corresponding
group member.
np
The loudspeaker and microphone of the destination
phone are automatically switched on.
Enhanced phone functions
53