Time Sync Card; Audio Clock Card - Studer OnAir 3000 Operating Instructions Manual

5.12.3.10

Time Sync Card

Error Code Error Type
9000 WARNING
9001 WARNING
5.12.3.11

Audio Clock Card

Error Code Error Type
9100 ERROR
9101 WARNING
9102 WARNING
9103 ERROR
Date printed: 31.10.08
TIME SYNC, No communication to Time Sync Card.
Appears during power-up or runtime if the selected TimeSyncRef is ExtTimeSync and the communication
to the Time Sync Card is lost.
TIME SYNC, Could not open port COM'X'
Appears during init phase if the specified COM port cannot be opened.
AUDIO CLOCK, No communication to Audio Clock Card.
Appears during power-up and runtime if the communication to the Audio Clock Card is lost.
AUDIO CLOCK, Could not open port COM'X'
Appears during init phase if the specified COM port cannot be opened.
AUDIO CLOCK, Clock reference changed to 'WordClock'.
Appears during runtime if the Audio Clock Card changes the SyncSource autonomously.
The message appears only if SourceAutoSelect is ON.
AUDIO CLOCK, Missing external 'WordClock'.
Appears during power-up and runtime if the clock specified by the SyncSource is not available.
The message appears only if SourceAutoSelect is OFF.
SW V3.0
OnAir 3000 Digital Mixing Console
Error Text / Remarks
Error Text / Remarks
Operation 5-115