(Monitoring) Cr/St 1 Hp (Headphones) Pages - Studer OnAir 3000 Operating Instructions Manual

5.3.5.3

(Monitoring) CR/ST 1 HP (Headphones) Pages

HP SRC/MON
DJ / Guest phone Volume
Date printed: 31.10.08
In normal mode, MON is selected, and the CR and studio 1 DJ headphones
DJ phone
are then used for monitoring the source selected on the MON - CR or MON
- ST 1 page, respectively
second source can be temporarily selected which is then mixed to the normal
monitoring source.
For SW V2.1 and up, an additional, third signal may be monitored on the CR
HP SRC
or studio 1 DJ headphones. This is selected with the HP SRC rotary encoder
and its display.
When activating the HP SRC/MON button, this third signal is fed to the left
DJ headphone channel; the standard monitor signal plus the one selected with
the add function are then mixed to the right channel.
The balance between the left and right DJ headphone channels is adjusted
Balance
with the Balance rotary encoder; the current balance setting is indicated by
the adjacent purple bargraph.
The headphones volume is adjusted with the two Volume rotary encoders;
the current volume setting is indicated by the adjacent purple bargraphs.
Depending on the configuration, individual talkback to the DJ and the guest
headphones may be selected; in such a case, the PFL speaker(s) is/are mut-
ed.
SW V3.0
OnAir 3000 Digital Mixing Console
(see chapter 5.3.5.1). With the add function, a
Operation 5-33