Miscellaneous Cards; D19M Sync Receiver; Optical/Coax Interface - Studer D19m Service Instructions Manual

2.6 Miscellaneous Cards

2.6.1

D19m Sync Receiver

2.6.2

Optical/Coax Interface

Date printed: 30.06.20
The sync receiver distributes an AES/EBU sync signal on the backplane and
is required if several cards are used in standalone mode, without a MADI or
a MADO card. This unit prevents that a separate sync signal must be wired
for each card.
The Optical/Coax Interface is used for converting MADI signals from opti-
cal into electrical signals and vice versa. It is a Euro card unit normally used
for standalone application, e.g. in a 1U high ASC rack. For integration into
a system, additional information is required; please apply to Studer in such a
case.
It can be powered either with 5 V
10...35 V , depending on the jumper setting.
DC
D19m Technical Description
or a with variable supply voltage of
DC
1.940.557
1.940.558
D19m E61