System With Remote Midi Connection - Studer OnAir 3000 Operating Instructions Manual

Digital mixing console sw version 3.0
Hide thumbs Also See for OnAir 3000:
Table of Contents

Advertisement

D21m System
4.2

System with Remote MIDI Connection

4-2 System Examples
Remote I/O Box 1 ...
Remote
I/O Boxes
Hub
(and I/O)
SCore &
I/O Frame
Any serial signal, such as MIDI or Sony 9-pin (machine control) may be
transmitted through a MADI connection without losing any audio bandwidth
or microphone control of the remote I/O box. An RS422 connector labeled
"Aux" can be found on the MADI I/O card (hub frame side) as well as on the
serial card of the remote I/O frame. This card is located between slot 12 and
the power supplies. The required baud rate is set on the MADI I/O (local)
and MADI HD (remote) cards.
I/O Frames with Different
Types of I/O Cards
... Remote I/O Box 5
. . . .
0...64 Ch Optical MADI, incl. MIDI
MIDI Signal into "AUX" RS422 of MADI I/O Card
RS422 for Mic Control
4...6 AES/EBU Outputs
to Monitoring Frame
MIDI Signal into
"AUX" RS422 of
Remote I/O Box
Date printed:
31.03.09

Advertisement

Table of Contents
loading

Table of Contents