4
Preparation
V
CAUTION!
Observe the safety instructions in the
page
11ff.
4.1
Floorstand model
4.1.1
Opening the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the sever, press the on/off
switch.
Ê Pull all power connectors out of the power outlets.
Ê If required, remove the lock on the side cover.
3
2
Figure 2: Opening the server
Ê Open the latch (1).
Ê Push back the left-hand side cover approxiate 2 cm (2).
Ê Remove the side cover (3).
TX300 S3
chapter "Safety notes" on
Options Guide
1
17