Fujitsu PRIMERGY TX300 S3 Options Manual page 57

Accessible drives
Figure 45: Taking out the dummy
Ê Pull the cable out of the dummy.
Ê Take the dummy out of the frame by extracting sideward the frame until the
four noses of the frame disengage.
Figure 46: Connecting cable to floppy disk drive
Ê Connect the cable to the rear side of the slimline floppy disk drive. Proceed
as follows: pull the lock bar upward, insert the cable with the isolated cable
side in direction of the lock bar and push the lock bar downward.
TX300 S3
Installing a slimline floppy disk drive
Options Guide 57