4
Replacement routines
V
ATTENTION!
When working with systems and boards, make sure you observe the
safety information in the
I
The replacement routines are described using a rack model as an
example. Unless described separately, the procedures also apply to the
floor-standing models.
4.1
Preparation
If you want to replace components which are not hot-pluggable, proceed as
follows:
Ê Exit all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Unplug the power plugs.
chapter "Important notes"
Service Supplement TX600 S3
on
page
11ff.
21