Fujitsu PRIMERGY TX300 S3 Options Manual page 33

Processors
Figure 18: Removing the dummy cover for the processor fan
Ê Press on the hook in the direction of the arrow (1) and remove the dummy
cover for the processor fan in the direction of the arrow (2).
V
CAUTION!
Keep the dummy cover for future use. If you remove the processor again
and do not replace it with a new one, reinstall the dummy cover. When
you install the dummy cover, first place the lower hook on the processor
fan holder and then press the dummy cover toward the front of the device
until the upper hook latches in place. This ensures that the system is
cooled properly.
TX300 S3
Installing a second processor
2
Options Guide
1
33