Fujitsu PRIMERGY TX300 S3 Options Manual page 7

Introduction Extensions and conversions
Extension of the main memory
The eight slots for the main memory are suitable for FBD533/PC2-4200F or
FBD667/PC2-5300F Fully Buffered DIMM memory modules. The organization
in four memory banks, 1 to 4, permits rapid memory access with two-way inter-
leaving.
Memory modules must always be incorporated in pairs. A memory bank must
always be equipped fully with the same type of memory modules.
ROMB (RAID on motherboard)
The on-board SAS RAID controller can be upgraded to a RAID5 (RAID 0, 1, 5,
10, 50) controller with a "MegaRaid ROMB SAS" upgrade kit. In this case the
the RAID5 funtionality is activated by installing a license key and a cache
module.
RemoteView
RemoteView provides you with a comprehensive test and diagnostics package.
The relevant hardware components are integrated on the system board.
Additional accessible drives
Three free 5.25-inch bays are available for accessible drives.
In the third 5.25-inch bay a DVD-ROM drive or a multibay (FDD-DVD-LocalView
box) can be installed. The multibay can be equipped with a slimline floppy disk
drive, a slimline DVD-ROM drive and a LocalView module.
In the second and the third 5.25-inch bay a SAS/SATA HDD extension box can
be installed. This SAS/SATA HDD extension box can be equipped with a slimline
floppy disk drive (or a LocalView module), a slimline DVD-ROM drive and two
SAS/SATA hard disks.
LocalView module (alphanumeric system display)
The LocalView module provides you with the option of displaying system infor-
mation and hardware system faults alphanumerically. This is an intelligent
module with a micro controller and its own memory, which functions indepen-
dently of the server system.
Options Guide 7
TX300 S3