Select Symbologies And Symbology Options; Data Editing Option - KoamTac KDC400 User Manual

Select Symbologies and Symbology Options

The process for scanning and reading barcodes is delicate and complicated. Although your KDC is
equipped with a high performance scan engine, if configured incorrectly it may not perform at its peak
performance level. To ensure its high performance, the KDC comes configured to optimize its scan
engine technology. Unless you clearly understand the impact of your changes to the KDC settings,
please do not change factory default settings. Please refer to Appendix A for details. Pressing the Default
icon will reset all symbology related options to factory default settings.

Data Editing Option

Prefix - Allows you to add a prefix to scanned data which can then be stored in KDC or wedged to the
host. The Prefix format must be defined in the data format menu of KTSync. The maximum length for a
Prefix is 11 characters. NOTE: This Prefix option is different from the Prefix option in KTSync which
appends the prefix to data during synchronization.
Suffix - Allows you to add a suffix to scanned data which can then be stored in KDC or wedged to the
host. The Suffix must be defined in the data format menu of KTSync. The maximum length for a Suffix is
11 characters. NOTE: This Suffix option is different from the Suffix option in KTSync which appends the
suffix to data during synchronization.
AIM ID - Allows you to add AIM ID to scanned data which can then be stored in KDC or wedged to the
host. AIM ID must be defined in data format menu of KTSync. AIM ID is either added to the end of Prefix
or Suffix.
Partial Data: Allows you to display and store partial data. User defines the start position and number of
characters to be displayed and stored.
Select the x characters from y position
Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to Select
Partial Data Length 0 means Select all characters from y position.
Erase the x characters from y position
Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to Erase
Partial Data Length 0 means Erase all characters from y position.
66
KDC400 User Manual