Set Barcodes Menu; Code Options Menu; Scan Options Menu - KoamTac KDC400 User Manual

Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the barcode
symbologies you will be scanning. For maximum scan performance, you should select only the
symbologies you are scanning. Please refer to Appendix A.1 – Symbologies for a detailed listing of
symbologies supported by your KDC.

Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters,
Symbology Conversion, Verification of Optional Check Character, Transmission of Check Digit, and
Concatenate. Please refer to Section 4.3 and Honeywell IT5x80 reference manual for a detailed listing
of Code Options for the symbologies supported by the KDC.

Scan Options Menu

Timeout: Allows you to set the length of time before the KDC will stop scanning a barcode from .5
second up to 10 seconds. The default is 2 seconds.
Minimum Barcode Length: Allows you to set a barcode length from 2 characters to 36 characters
(KDC410/415) or 2 characters to 48 characters (KDC420/425). It is strongly recommended that you
maximize the minimum barcode length setting to prevent possible errors. The default is 4
characters.
1D
Symbology
Codabar
Code 11
Code 32
Code 39
Code 93
Code 128
EAN-8
EAN-13
GS1 Composit
I2of5
Matrix 2of5
MSI
Plessey
PosiCode
GS1 Omni
Minimum (Default)
2(4)
1(4)
0(0)
0(0)
0(0)
2(4)
1(4)
4(4)
4(4)
2(4)
37
KDC400 User Manual
Maximum (Default)
60(60)
80(80)
48(48)
80(80)
80(80)
80(80)
80(80)
48(48)
48(48)
80(48)