Configure Kdc - KoamTac KDC400 User Manual

Configure KDC

The KDC is designed to meet the data collection requirements of many different industries in a variety of
dynamic situations. To perform well in these diverse environments, the KDC is designed to be
configured easily and quickly. But, to perform at its maximum level, the KDC must be configured
properly. Until you are familiar with configuring the KDC, it is recommended that you DO NOT modify the
KDC settings. The KDC can be configured in three different methods which are explained in Section 3.3
– KDC Menus(KDC100/200/250/300 only), Chapter 4 –Synchronization, and Appendix C – Special
Barcodes.
CONFIGURATION METHODS FOR THE KDC100/200/250/300
KDC Menu
®
KTSync Software
Special Barcodes
CONFIGURATION METHODS FOR THE KDC400
®
KTSync Software
Special Barcodes
Figure 4 - Location of Scroll Buttons
29
KDC400 User Manual
Press UP and DOWN Scroll Buttons
simultaneously to access the KDC
menu.