File Menu; Connect To Kdc; Synchronize - KoamTac KDC400 User Manual

5.2 File Menu

Connect to KDC

The KDC connects to a COM port automatically when connected to your PC's USB port. You can
manually assign the KDC COM port using KTSync
needed.
The COM port assignment is found in the Windows Device Manager.
®
KTSync will not connect to the KDC if it is in KDC Menus. You must EXIT from the KDC
Menus.
®
If KTSync
1. Exit KTSync
2. Check that you have connected the KDC to a USB port on your PC.
3. Make sure to use the cable provided with the KDC.
4. Check that the KDC is not in KDC Mode Menu.
5. Restart KTSync
NOTE: You can manually assign the COM port using KTSync
menu.

Synchronize

Under the File Menu, this option allows you to manually synchronize data on KDC with host. This option
is similar to clicking on the Synchronize button in the KoamTac Data Synchronizer box.
Figure 11 - COM Port Selection for KDC
fails to connect automatically to the KDC, please follow these directions.
®
.
®
.
®
Connection submenu under File menu if
®
Connect option under the File
58
KDC400 User Manual