KoamTac KDC400 User Manual page 19

Connect KDC to Computer
Using the USB cable included with the KDC, follow the directions below.
Connect the cable's ultra mini USB connector to the KDC.
Connect the cable's Type A USB connector to your PC.
Wait until your computer beeps and/or displays the message Found New Hardware.
Found New Hardware Wizard
Select "No, not this time" option in Found New Hardware Wizard and click Next if your PC pops
up the following Found New Hardware Wizard.
Select "Install the software automatically (Recommended)" option in Found New Hardware
Wizard and click Next if your PC pops up the following Found New Hardware Wizard.
19
KDC400 User Manual