Using other Developed Applications with free SDK – Android/iOS ............15 Product Specifications ............................16 1.0W UHF Reader ............................16 0.5W UHF Reader ............................16 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p1...
The 1.0W or 0.5W UHF Reader is attached to the back of KDC480/485 SmartSled Scanners. 1.1 KDC480/485 1.0W UHF Reader Diagram * 1.0W UHF Reader mounted to KDC480 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p2...
Press SCAN and DOWN buttons simultaneously for 3 seconds. b) The KDC will beep when it is turned ON. * 2017/2018/early 2019 versions of KDC480 turn on upon pressing scan button. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p3...
The KDC only transmits data to the host device. Note: HID inputs data directly into an application. SPP requires the KOAMTAC SDK to input data into an application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/...
In HID or HID Windows Profile, check the list of available Bluetooth devices on your host device. From the list, select the KDC480-BLE/485-BLE listed by serial number in brackets See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p5...
Page 7
KDC480-BLE/485-BLE. KDC480-BLE/485-BLE will beep upon connection and display “Bluetooth Connected” on its screen. Now it is ready to use. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p6...
The KDC480 UHF reader should be used by a professional person who fully understands how to operate the KDC480 UHF reader. • Maintain at least 20cm (about 8 inches) between the KDC480 UHF reader and the body when reading UHF RFID tags. •...
UHF Mode to Barcode Mode to save battery life in the case of the trigger being stuck in the scan position. This option is enabled by default and may be disabled. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p8...
Scan the barcode on below that corresponds with your preference for Tag Counting. Count = 0 Count = 5 Count = 20 Count = 10 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p9...
To test your connection, scan any barcode. If the connection is successful, the barcode data will display on the screen. (Fig. 3) See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p10...
Select ‘choose input method’ and you can select the default keyboard from here. (Fig. 5) < Fig. 4 > < Fig. 5 > See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p11...
< Fig. 8 > Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p12...
UHF configuration. You can clear the current information with “Clear” button to re-read. g) To change the read mode, select the Barcode Mode button. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p13...
Page 15
Total time it takes to read, in ms ID for unique tags COUNT Number of reads for each unique tag EPC data of tag read PC data of tag read See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p14...
Quick Guide 3.11 Using other Developed Applications with free SDK – Android/iOS A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC customers to ensure smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the...
+13 to +27dBm (Japan +18 to +23dBm) Read Rate 100 tags per second 409,600 RFID tags Tag Storage (in case of 12 bytes of EPC Data) See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC480_UHF_20220317 p16...