Auto Power Off; Beep Warning; Pwr Off Time; Poweroff Msg - KoamTac KDC400 User Manual

4.4 Auto Power Off

The Auto Power Off option works in conjunction with the PWR Off Time option. This option allows the KDC
to power off Bluetooth automatically when the KDC is NOT CONNECTED to the host for the time duration
specified in the PWR Off Time option.
The default for this option is Enabled. It is strongly recommended to keep it enabled to maximize the
operation time of the KDC. If Auto Power Off is enabled, Bluetooth can be manually powered off before
specified time in PWR Off Time option.

4.5 Beep Warning

The KDC beeps to acknowledge the status of the Bluetooth connection as follows:
1. One high short beep when Bluetooth is connected.
2. One low short when Bluetooth is disconnected.
3. Five short beeps if:
"Beep Warning is ENABLED"
"Auto Power Off is DISABLED"
"KDC200/200P/300 is DISCONNECTED from HOST"
"Bluetooth power is ON"

4.6 PWR OFF Time

The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is
Enabled, the KDC powers off Bluetooth when the time duration specified in the PWR Off Time option is met
and the KDC is NOT CONNECTED to the host. The time settings for this option are from one (1) minute to
30 minutes. The default is five (5) minutes.

4.7 PowerOFF Msg

KDC can display "Bluetooth Disconnected" message if Power Off Message option is Enabled. "Bluetooth
Disconnected" message would be displayed if PowerOff Msg option is Enabled and KDC is disconnected
with other Bluetooth device.

4.8 MAC Address

User can verify KDC Bluetooth MAC Address.

4.9 FW Version

User can verify KDC Bluetooth firmware version in BT FW menu.
50
KDC400 User Manual