Maintenance; Ordering Of Spare Parts - ESAB Aristotig 255 LTN 255 Instruction Manual

GB
7

MAINTENANCE

Regular maintenance is important for safe, reliable operation.
Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
Only those persons who have appropriate electrical knowledge (authorized
personnel) may remove the safety plates to connect or carry out service,
maintenance or repair work on welding equipment.
Generally, Aristotig 255 do not require any maintenance. Normally, it is sufficient to
blow out the machine using clean, compressed air annually, and the dust filter should
be cleaned regularly.
If the machine is set up in dusty or dirty environments the machine and dust filter
should be cleaned more often.
Dismantling the filter.
8

ORDERING OF SPARE PARTS

Repair and electrical work should be performed by an authorized ESAB serviceman.
Use only ESAB original spare and wear parts.
LTN 255 is designed and tested in accordance with the international and European
standards IEC/EN 60974- -1 and EN 50199. It is the obligation of the service unit which
has carried out the service or repair work to make sure that the product still conforms
to the said standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bt19d12e
bt07d109
- - 24 - -