Programming Through The Web User Interface - Panasonic KX-TGP500 B01 User Manual

Programming through the Web User Interface

Programming through the
Web user interface
You can program the following features through
the Web user interface. The password is required.
Contact your administrator for further information.
– Network settings
– Call forward (page 29, 36)
– Do not disturb (page 29, 36)
– Block anonymous calls (page 30, 37)
– Incoming call barring
– Anonymous calls (Block Caller ID) (page 31, 38)
– Updating the base unit software
*1 This feature is explained as "Call Rejection
Phone Numbers" in the Web user interface.
*2 This feature is explained as "Firmware Update"
in the Web user interface.
Embedded Web
You need to activate the Web user interface every
time you program features using a computer. The
Web user interface is deactivated after setting on
the computer.
The default setting is "Off".
Y Handset
1
1 (centre of joystick) i {#}{5}{3}{4}
2
{V}/{^}: Select the desired setting.
3
M i {i}
: Base unit
1
K (middle soft key) i {#}{5}{3}{4}
2
{V}/{^}: Select the desired setting.
3
M i {b}
40
*1
(page 30, 37)
*2
(page 32, 38)
Document Version 2010-07