Color Reproduction Adjustment - Sony MVC-FD97 Service Manual

13. Color Reproduction Adjustment

Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
13-1. Color Reproduction Adjustment (Without ND Filter)
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Perform "Auto White Balance Standard Data Input"
before this adjustment.
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of the unit OFF/ON.
Note 3: "Color Reproduction Adjustment" is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1 0 01 01
2 5 F1 FF
3 D 63 40
4
5 B 75
6 B 75 00
7 6 01 AB
8 6 12 80
9
10 6 12 00
11
12 6 01 A9
13 6 02
Note 4: The adjustment data will be automatically input to
page: F, address: 41 to 48 and 5C to 5F.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 B 75
3 5 F1 FF
4 D 63 40
5
6 0 01 00
7
CAMERA
Color bar chart
(Color reproduction adjustment
frame)
F
41 to 48, 5C to 5F
Procedure
Press PAUSE button.
Perform "Data setting during
camera system adjustment".
(Refer to page 5-14)
Note down the data.
Press PAUSE button.
Press PAUSE button.
Press PAUSE button.
Wait for 1 second.
Press PAUSE button.
Wait for 2 seconds.
Press PAUSE button. (Note 4)
Check the data changes to "01".
Procedure
Press PAUSE button.
Set the data noted down at
step 5, and press PAUSE
button.
Press PAUSE button.
Release the data setting
performed at step 4.
(Refer to page 5-14)
Perform "Color Reproduc-
tion Check".
13-2. Color Reproduction Adjustment (With ND Filter)
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Perform "Auto White Balance Standard Data Input" and
"Auto White Balance ND Filter Compensation" before
this adjustment.
Note 2: Check that the data of page: 6, address: 02 is "00". If
not, turn the power of the unit OFF/ON.
Note 3: "Color Reproduction Adjustment" is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1 0 01
2 5 F1
3 D 63
4
5 F 27
6 F 27
7 B 75
8 B 75
9 6 1C
10
11 6 01
12 6 12
13
14 6 12
15
16 6 01
17 6 02
Note 4: The adjustment data will be automatically input to
page: F, address: 51 to 58 and 60 to 63.
5-25
CAMERA
Color bar chart
(Color reproduction adjustment
frame)
F
51 to 58, 60 to 63
Procedure
01
FF
40 Press PAUSE button.
Perform "Data setting during
camera system adjustment".
(Refer to page 5-14)
Note down the data.
80 Press PAUSE button.
Note down the data.
00 Press PAUSE button.
03
Wait for 1 second.
C3 Press PAUSE button.
80 Press PAUSE button.
Wait for 1 seconds.
00 Press PAUSE button.
Wait for 2 seconds.
C1 Press PAUSE button. (Note 4)
Check the data changes to "01".