Color Reproduction Adjustment - Sony MVC-FD100 Service Manual

MVC-FD100/FD100H/FD200/FD200H

13. Color Reproduction Adjustment

Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 2: "Color Reproduction Adjustment" is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1
2
3 6 01
4 6 12
5
6 6 12
7
8 6 01
9 6 02
Note 3: The adjustment data will be automatically input to page:
F, address: 41 to 48 and 5C to 5F.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01
2
RadarW RadarW RadarW
CAMERA
Color bar chart
(Standard picture frame with the
zoom lens at WIDE end)
F
41 to 48, 5C to 5F
Procedure
Perform "Data setting during
camera system adjustment".
(Refer to page 5-16)
Perform "Picture Frame
setting".
(Refer to page 5-17)
AB Press PAUSE button.
80
Wait for 1 second.
00
Wait for 2 seconds.
Press PAUSE button.
A9
(Note 3)
Check the data changes to
"01".
Procedure
00 Press PAUSE button.
Release the data setting
performed at step 1.
(Refer to page 5-16)
5-28