Lcd Initial Data Input - Sony MVC-FD97 Service Manual

Alignment disk (Disk-1, Disk-2)
(A set of alignment disks consists of two disks as a pair.)
Disk-1: 8-967-990-01
(TFD2-1 (+)) (+17.5 µm)
Disk-2: 8-967-990-11
(TFD2-2 (–)) (–17.5 µm)
[Common signals in the disks]
Data Code
MVC-001C.JPG
MVC-002M.JPG
MVC-003V.JPG
MVC-004W.JPG
MVC-005H.JPG
MVC-006T.JPG
MVC-007R.JPG
MVC-008G.JPG
MVC-009B.JPG
MVC-010D.JPG
MVC-011N.JPG
• Contents of alignment disk-1
(Common signal) + (+17.5 µm alignment)
• Contents of alignment disk-2
(Common signal) + (–17.5 µm alignment)
Signal
Color bars
Monoscope
V. COM adjustment signal
100% white
50% white
Stair-step signal of 10 steps
Red single color
Green single color
Blue single color
Camera color bars
Camera monoscope

1. LCD Initial Data Input

Mode
Signal
Adjustment Page
Adjustment Address
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, and enter the data given in the following table.
Note: Press the PAUSE button each time the data are set, as the
data are written to non-volatile memory (EEPROM).
Data
Address
TYPE S
D0 A2
D1 70
D2 A0
D3 7A
D4 B8
D5 B0
D6 68
D7 6F
D8 7A
D9 6E
DC B9
DD 6F
DE 13
DF 00
Processing after Completing Adjustments:
1) Select page: 0, address: 01, and set data: 00.
5-43
PLAY
Arbitrary
D
D0 to D9, DC to DF
Remark
TYPE C
B2 Bright adjustment
74 Color adjustment
A8
White blance adjustment
7A
C0 Contrast adjustment
54 D range adjustment
8A V-COM level adjustment
6F VCO adjustment (NTSC)
8A V-COM adjustment
6E
Fixed value
B5
5F VCO adjustment (PAL)
13
Fixed value
00