Switch Check (3); Led Check; Self Diagnosis Code - Sony MVC-FD97 Service Manual

5. Switch Check (3)

Page 2
Using method:
1) Select page: 2, addresses: 54 to 59.
2) By discriminating the dispaly data, the pressed key can be
discriminated.
Address
00 to 12
54
(KEY AD0)
(IC404 uk)
55 CONTROL DOWN CONTROL UP
(KEY AD1) (PK-55 board) (PK-55 board)
(IC404 ul) (S701)
56 CONTROL RIGHT CONTROL LEFT CONTROL SET
(KEY AD2) (PK-55 board) (PK-55 board)
(IC404 i;) (S701)
57
(KEY AD3)
(IC404 ia)
58 PROGRAM AE+ PROGRAM AE– PROGRAM AE WHITE BALANCE
(KEY AD4) (AE-25 board) (AE-25 board)
(IC404 is) (S356)
59
(KEY AD5)
(IC404 id)

6. LED Check

Page 2 Address 06
Using method:
1) Select page: 2, address: 06, and set data: 02.
2) Check that all LED except for the ACCESS LED are lit.
3) Select page: 2, address: 06, and set data: 00.

7. Self Diagnosis Code

Display Code Countermeasure
Change the disk and turn off the main
C:32:01
power then back on.
Replace the floppy disk or "Memory
C:13:01 Stick".
Format the floppy disk or "Memory Stick"
with the MVC-FD97.
Checking of flash unit or replacement of
E:91:01
flash unit
E:61:00
Checking of lens drive circuit
E61:10
Note : The error code is cleared if the battery is removed, except defective flash, unit.
*1: When the flash charging failed, Page: D, Address: 67, Data: 04 are written.
After repair, be sure to write Page: D, Address: 67, Data: 00.
[Power supplying Method]
Use the AC power adaptor (AC-L10A) when supplying the power to this set.
Address 54 to 59
13 to 3A 3B to 62
DISPLAY
(PK-55 board) (PK-55 board) (PK-55 board) (PK-55 board)
(S701) (S702)
(PK-55 board) (PK-55 board)
(S701) (S701)
(AE-25 board) (AE-25 board) WHITE BALANCE (AE-25 board)
(S355) (S354)
Data 02
Data
63 to 87 88 to B3
MACRO
(CF-83 board)
(S401)
VOLUME+ VOLUME–
(S704) (S706)
FLASH
(S705)
ONE-PUSH
(S353) (AE-25 board)
(S352)
Cause
Defective floppy disk.
• The type of floppy disk that cannot be
used by this machine, is inserted.
(Such as 2DD)
• Data is damaged.
• Unformatted disk or "Memory Stick"
is inserted.
Abnormality when flash is being
charged.
When failed in the focus initialization.
5-54 E
5-54
B4 to D5 D6 to FF
FOCUS
(CF-83 board)
(S402)
LCD ON/OFF
(S708)
STEADY SHOT
(CF-83 board)
(S403)
SPOT METER
(S351)
OPEN
(FLASH)
(FLASH UNIT)
Caution Display During Error
DRIVE ERROR
DISK ERROR
MEMORY STICK ERROR
Flash LED
Flash display
*1
Flashing at 3.2 Hz
—