Alarms; Other Functions - MeiTrack TC68S User Manual

MEITRACK TC68S User Guide

3.3.2 Alarms

Function Description
Disassemble alarm An alarm will be generated and sent to the platform or user when the device is removed
from the OBD connector.
Speeding Set the upper limit by platform. When the vehicle speed exceeds the preset value, an
alarm will be generated.
Geo-fence With the coordinate and radius, you can set a circle geo-fence.
In/Out Geo-fence alarms can be reported to the platform or notified to the user by SMS.
At most 8 circle geo-fences are allowed.
SOS An alarm will be generated when the SOS button is pressed.
Low power alarm An alarm will be generated when the voltage of the external power supply is lower than
11.6 V.
Device status alarm An alarm will be generated when the device is powered on or restarted.

3.3.3 Other Functions

Function
Listen-in
Over-the-Air (OTA)
GPS log
GPS + GSM dual-module tracking
GPS blind spot report
GSM blind spot storage/resend
Mileage report
ACC ON report
ACC OFF report
Maintenance report
Copyright © 2015 Meitrack Group All rights reserved.
Description
Know vehicle situations after the vehicle is stolen.
Upgrade device firmware.
When the GPS is valid, the device will record the driving traces at the preset
time interval. You can use Meitrack Manager software to read these records
(at most 130,000).
When the GPS is invalid, the GSM base station will use the signal tower to
provide an approximate coordinate, ensuring that the vehicle can be located
anytime.
When you enter or exit an area without GPS signal, the device will send a
report to the platform.
When data cannot be sent to the platform in the GPS blind spot, the data will
be automatically stored. When the GSM becomes valid, the data will be
automatically sent. Built-in 8 MB flash memory can store 8,000 GPRS records
and 256 SMS records.
Each GPRS record includes the vehicle mileage. For the first use, you can
change the default mileage.
Select the ACC ON report function. The device will send the ACC ON report to
the platform or mobile phone while ACC ON.
Select the ACC OFF report function. The device will send the ACC OFF report
to the platform or mobile phone while ACC OFF.
An SMS report includes the mileage, average driving speed, driving duration,
and maximum driving speed of this trip.
Set the maintenance mileage and duration on the platform. When the vehicle
maintenance mileage or duration reaches the preset value, the device will
send a maintenance alert.
- 6 -