MEITRACK TC68S User Guide
5.5 Configured on a Computer
This section describes how to use Meitrack Manager to configure the TC68S on a computer.
Procedure:
1.
Install the USB driver and Meitrack Manager.
2.
Connect the TC68S to a PC with a USB cable.
3.
Run Meitrack Manager, and start the TC68S. Meitrack Manager will automatically detect the tracker port number and
read its parameters.
For details about MEITRACK Manager, see the MEITRACK Manager User Guide.
5.6 Tracking System
Visit obd.trackingmate.com, and use the following account to log in to the GPS tracking system OBD II edition:
User name: IMEI number (15 digits; obtained from the tracker label)
Copyright © 2015 Meitrack Group All rights reserved.
- 12 -