Yealink SIP-T4X Administration Manual page 86

Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
Local
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. Enter the desired time interval (in seconds) in the Auto Redial Interval (1~300s)
field.
The default time interval is 10s.
4. Enter the desired times in the Auto Redial Times (1~300) field.
The default times are 10.
5. Click Confirm to accept the change.
To configure auto redial via phone user interface:
1. Press Menu->Call Features->Others->Auto Redial.
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configuring Basic Features
Configure auto redial.
For more information, refer to
Auto Redial on page 280.
Configure auto redial.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure auto redial.
71