Yealink SIP-T4X Administration Manual page 288

Example
Parameter-
lang.wui
Description
Format
Default Value
Range
Example
Parameter-
phone_setting.lcd_logo.mode
Description
lang.gui = English
Configuration File
<y0000000000xx>.cfg
Configures the language used on the web
user interface.
Note: The default language used on the web
user interface depends on the language
preferences of your browser. If the language
of your browser is not supported by the IP
phone, the web user interface will use English
by default.
String
Blank
Valid values are:
English
Chinese_S (not applicable to SIP-T42G/T41P)
Chinese_T (not applicable to SIP-T42G/T41P)
French
German
Italian
Portuguese
Spanish
Turkish
lang.wui = French
Configuration File
<y0000000000xx>.cfg
Configures the logo mode of the LCD screen.
If it is set to 0 (Disabled), the IP phone is not
allowed to display a logo.
If it is set to 1 (System logo), the LCD screen
will display the system logo.
If it is set to 2 (Custom logo), the LCD screen
will display the custom logo (you need to
upload a custom logo file to the phone).
Appendix
273