Yealink SIP-T4X Administration Manual page 117

Administrator's Guide for SIP-T4X IP Phones
To configure Transfer on Conference Hang up via web user interface:
1. Click on Features->Transfer.
2. Select the desired value from the pull-down list of Transfer on Conference Hang up.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key.
This feature depends on support from a SIP server. For many SIP servers, directed call
pickup requires a directed pickup code, which can be configured on a phone or per-line
basis.
Note
It is recommended not to configure the directed call pickup key and the DPickup soft key
simultaneously. If you do, the directed call pickup key will not be used correctly.
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configuration File
102
<MAC>.cfg
Configure the directed call
pickup code on a per-line basis.
Configure directed call pickup
feature on a phone basis.
For more information, refer to
Directed Call Pickup on page