Yealink SIP-T4X Administration Manual page 296

Format
Default Value
Range
Example
Parameter-
auto_redial.times
Description
Format
Default Value
Range
Example
Parameter-
account.X.auto_answer
Description
Format
Default Value
Range
Example
Integer
10
1 to 300
auto_redial.interval = 10
Configuration File
<y0000000000xx>.cfg
Configures the redial times for the IP phone.
The IP phone tries to redial the dialed number
as many times as configured till the callee
answers the call.
Integer
10
1 to 300
auto_redial.times = 10
Configuration File
<MAC>.cfg
Enables or disables auto answer feature for
account X.
If it is set to 1 (Enabled), the IP phone can
automatically answer an incoming call.
X ranges from 1 to 6.
Note: The IP phone cannot automatically
answer the incoming call during a call even if
auto answer is enabled.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
account.1.auto_answer = 1
Appendix
281