Yealink SIP-T4X Administration Manual page 111

Administrator's Guide for SIP-T4X IP Phones
2. Select the desired value from the pull-down list of Fwd International.
3. Click Confirm to accept the change.
To configure call forward in phone mode via phone user interface:
1. Press Menu->Call Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press
Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.
3) (Optional.) Enter the always forward on code and off code respectively in the
On Code and Off Code fields.
b) If you select Busy Forward:
1) Press
Busy Forward field.
2) Enter the destination number you want to forward all incoming calls to when
the IP phone is busy in the Forward To field.
3) (Optional.) Enter the busy forward on code and off code respectively in the
On Code and Off Code fields.
96
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired value from the