Yealink SIP-T4X Administration Manual page 37

Administrator's Guide for SIP-T4X IP Phones
Procedure
Network parameters can be configured manually using the configuration files or locally.
Configuration File
Local
To configure the IP address mode via web user interface:
1. Click on Network->Basic.
2. Select the desired value from the pull-down list of Mode (IPv4/IPv6).
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.
4. Click OK to reboot the IP phone.
22
<MAC>.cfg
Web User Interface
Phone User Interface
Configure network parameters of
the IP phone manually.
For more information, refer to
Static Network Settings
249.
Configure network parameters of
the IP phone manually.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure network parameters of
the IP phone manually.
on page