Yealink SIP-T4X Administration Manual page 201

Administrator's Guide for SIP-T4X IP Phones
RPC Method
Upload
ScheduleInform
FactoryReset
TransferComplete
AddObject
DeleteObject
Procedure
TR-069 can be configured using the configuration files or locally.
Configuration File
Local
To configure TR-069 via web user interface:
1. Click on Settings->TR069.
2. Select Enabled from the pull-down list of Enable TR069.
3. Enter the user name and password authenticated by the ACS in the ACS Username
and ACS Password fields.
186
File types supported by IP phones are:
Firmware Image

Configuration File

This method is used to cause the CPE to upload a
specified file to the designated location.
File types supported by IP phones are:
Configuration File

Log File

This method is used to request the CPE to schedule a
one-time Inform method call (separate from its
periodic Inform method calls) sometime in the future.
This method resets the CPE to its factory default state.
This method informs the ACS of the completion
(either successful or unsuccessful) of a file transfer
initiated by an earlier Download or Upload method
call.
This method is used to add a new instance of an
object defined on the CPE.
This method is used to remove a particular instance
of an object.
<y0000000000xx>.cfg
Web User Interface
Description
Configure theTR-069 feature.
For more information, refer to
TR-069 on page 351.
Configure the TR-069 feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-preference&q=lo
ad