Yealink SIP-T4X Administration Manual page 359

Administrator's Guide for SIP-T4X IP Phones
Parameter-
network.lldp.enable
Description
Format
Default Value
Range
Example
Parameter-
network.lldp.packet_interval
Description
Format
Default Value
Range
Example
Internet Port
Parameter-
network.vlan.internet_port_enable
Description
344
Configuration File
<y0000000000xx>.cfg
Enables or disables LLDP feature on the IP
phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
network.lldp.enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the amount of time (in seconds)
between the transmissions of LLDP packet.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It works only if the parameter
"network.lldp.enable" is set to 1 (Enabled).
Integer
60
1 to 3600
network.lldp.packet_interval = 60
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to insert