Yealink SIP-T4X Administration Manual page 264

Format
Default Value
Range
Example
Parameter-
network.internet_port.type
Description
Format
Default Value
Range
Example
Parameter-
network.ip_address_mode
Description
parameter "network.internet_port.type" is set
to 0 (DHCP).
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
network.static_dns_enable= 0
Configuration File
<MAC>.cfg
Configures the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
0
Valid values are:
0-DHCP
1-PPPoE (not applicable to SIP-T42G/T41P)
2-Static IP Address
network.internet_port.type = 2
Configuration File
<MAC>.cfg
Configures the IP addressing mode.
IP phones support to use the IPv4 address only,
the IPv6 address only or both IPv4 and IPv6
addresses.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Appendix
249