To configure LDAP via web user interface:
1.
Click on Directory->LDAP.
2.
Select Enabled from the pull-down list of Enable LDAP.
3.
Enter the values in the corresponding fields.
4.
Select the desired values from the corresponding pull-down lists.
5.
Click Confirm to accept the change.
To configure an LDAP key via web user interface:
1.
Click on DSSKey->Line Key.
Phone User Interface
Configuring Advanced Features
et?p=contacts-LDAP&q=load
Assign an LDAP key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&model=1&q=loa
d&linepage=1
Assign an LDAP key.
135