Yealink SIP-T4X Administration Manual page 337

Administrator's Guide for SIP-T4X IP Phones
Format
Default Value
Range
Example
Parameter-
remote_phonebook.data.X.nam
e
Description
Format
Default Value
Range
Example
322
applicable to SIP-T42G/T41P IP phones.
tonelist = element[,element] [,element]...
Where
element = [!]freq1[+freq2][+freq3][+freq4]
/duration
Freq: the frequency of the tone (ranges from
200 to 7000 Hz). If the frequency is set to 0Hz,
it means silence. A tone can be comprised of
at most four different frequencies.
Duration: the time duration (in milliseconds,
ranges from 0 to 30000ms) of the dial tone.
You can configure at most eight different
tones for one condition, each tone are
separated by a comma (e.g.,
250/200, !0/1000, 200+300/500,
600+700+800+1000/2000). The exclamation
point (!) can be added optionally, which
means these tones are only played once.
Note: It works only if the parameter
"voice.tone.country" is set to Custom.
Refer to the introduction above
Blank
Not Applicable
voice.tone.dial = 800+200/1000, 0/100,
500/1200, 500+600+950+1500/5000
Configuration File
<y0000000000xx>.cfg
Configures the name of the remote phone
book.
String
Blank
String within 99 characters
remote_phonebook.data.1.name = yl01