Yealink SIP-T4X Administration Manual page 242

The following is an example of a directory template:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1"
enable="1" />
<item id_name="history" display_name="History" priority="2" enable="0" />
<item id_name="remotedirectory" display_name="Remote Phone Book"
priority="3" enable="0" />
<item id_name="ldap" display_name="LDAP" priority="4" enable="0" />
</root_favorite_set>
The super search template allows you to search for a contact in your desired lists when
the phone is in the dialing screen. The lists may contain Local Directory, History, Remote
Phone Book and LDAP . After setup, place the super search template to the provisioning
server and specify the access URL in the configuration files.
When editing a super search template, learn the following:
<root_super_search> indicates the start of a template and </root_super_search>

indicates the end of a template.
Create super search between <root_super_search> and </root_super_search>.

When specifying the display name of the directory list, the valid values are Local

Contacts, History, Remote Phone Book and LDAP .
When specifying the priority of search results, the valid values are 1, 2, 3 and 4. 1 is

the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list, the valid values are 0 and 1.

0 stands for Disabled, 1 stands for Enabled.
Procedure
Use the following procedures to customize a super search template.
Customizing a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, add the following string to the file.
Each starts on a separate line:
<item id_name="" display_name="" priority="" enable="" />
Where:
id_name="" specifies the existing directory list you want to configure. We do not
recommend editing this field.
display_name="" specifies the display name of the directory list. We do not
Resource Files
227