Installation Instructions - Fisher & Paykel OR90SDBGFX User Manual

Installation instructions

Installation instructions
12
Cooker overall dimensions [mm]
• height:
897 -
min
• product width:
897
• depth:
600
• cavity width
900
The cooker must be installed by a qualified technician and in compliance with local
safety standards. This cookers has class "2/1" overheating protection so that it can be installed
next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 200 mm must be left between the side of the cooker and the furniture.
The furniture walls adjacent to the cooker must be made of material resistant to heat.The
veneered synthetical material and the glue used must be resistant to a temperature of 90°C in
order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room
containing a bath or shower.
Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling
out.
It is essential that the cooker is positioned as stated.
910
max
Fig. 1 Dimensions and
distances from cooker